Q-FOG CYCLIC CORROSION TESTER

Q-FOG CYCLIC CORROSION TESTER

Mã sản phẩm: QFOGG4

Cyclic corrosion testing provides the best possible laboratory simulation of natural atmospheric corrosion. Research indicates that test results are similar to outdoors in resulting structure, morphology, and relative corrosion rates. 
Q-FOG cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. 
Q-FOG cyclic corrosion testers are the simplest, most reliable, and easiest to use corrosion testers available.

Share

Q-FOG CYCLIC CORROSION TESTER

Precise Control of Fog Dispersion
The Q-FOG cyclic corrosion chamber has superior fog dispersion compared to conventional systems, which cannot vary volume and distance independently.  A variable speed peristaltic pump controls the amount of corrosive solution delivered to the spray atomizer, while the air pressure regulator controls the distance of the “throw.”  Note that purified water is required for proper operation of Q-FOG corrosion testers. 

Solution Reservoir
Space utilization is maximized and maintenance is minimized with the Q-FOG tester's internal solution reservoir. The 120 liter reservoir has enough capacity for running most tests for 7 days or more. The reservoir has an integral salt filter and a built-in alarm to alert the operator when the solution is low. The integrated reservoir can optionally be connected to an external tank.

Fast Cycling
Q-FOG testers can change temperatures exceptionally fast because of their unique internal chamber heater and their high volume cooling/dry-off blower. An additional air heater allows very low humidity dry-off exposures.

Easy Programming and Specimen Mounting
The Q-FOG test chamber is designed to cycle between four conditions: Fog, Dry-Off, 100% Humidity (Model CCT only), and Dwell.  Test conditions, time, and temperature are controlled by a built-in microprocessor.  A remarkably simple user interface featuring dual, full-color touch-screens allows for easy user programming and operation in 17 languages.  The operator can quickly create new cycles, or run any of the pre-programmed cycles.  The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders and safety shut down.

 

 

Models

Q-FOG corrosion test chambers are available in two types. Model SSP performs traditional salt spray and Prohesion tests. Model CCT performs salt spray, Prohesion, and 100% humidity for most cyclic automotive tests.

Q-FOG SSP-600: conventional salt spray and Prohesion tests, 640 liter chamber volume
Q-FOG SSP-1100: conventional salt spray and Prohesion tests, 1103 liter chamber volume
Q-FOG CCT-600:  conventional salt spray, Prohesion, and 100% humidity, 640 liter chamber volume
Q-FOG CCT-1100: conventional salt spray, Prohesion, and 100% humidity, 1103 liter chamber volume

 

Q-FOG CYCLIC CORROSION TESTER

Other Products
Q-FOG CYCLIC CORROSION TESTER
Q-FOG CYCLIC CORROSION TESTER
  • Công ty TNHH Thiết Bị & Hóa Chất Nguyễn Quỳnh Anh
  • Trụ sở chính:
  • 32/7 Ly Thuong Kiet St. – Ward 08 – Tan Binh Dist. – Ho Chi Minh City 
    Hotline: (+84) 982 74 74 36 - 0909 282 287 

  • Văn phòng kinh doanh:
  • 1/30 Nguyen Van Vinh St. - Ward 4 - Tan Binh Dist. - Ho Chi Minh City
    Tel: (84-28) 3948 22 77 - 3948 22 99 | Fax: (84-28) 38 11 72 72
    Email: sales@nqaco.com 

    Total counter: 986903 | Đang xem : 11